A fixed price for your Manly Vale switchboard, worked out from a photo rather than a guess. Electrical3 is based in Cromer, minutes from Manly Vale, and this is work we do across the Northern Beaches every week.
Every figure below is what we install for, including GST.
| What | Price inc GST | What it covers |
|---|---|---|
| Fixed price from a photo | Free | Send a photo of the board and the meter. You get the price before anyone comes out. |
| Making room in a full board | $150 to $400 | Where the board is otherwise sound and just has no spare position. |
| Safety switches added | Quoted with the board | RCBOs on the circuits that need them, priced as part of the job. |
| Surge protection, same visit | $397 single phase $638 three phase | Cheapest while the board is already open, rather than a separate call-out. |
| Full board replacement | Quoted before we start | Ceramic fuses, no safety switches, or a board at the end of its life. |
Semis, terraces and walk-up blocks, which means half the boards here are shared. Before anything starts, the line between your lot and common property has to be established — otherwise the wrong party gets the bill for the work.
Post-war homes and unit blocks either side of Condamine Street, with the traffic of Warringah Road nearby. A working mix of house and strata work, with plenty of original 1950s and 60s boards still in service in the houses.
Common-property boards in strata blocks, where the fault often sits outside the unit itself
Original rubber or cotton-insulated wiring still live in unrenovated semis
Very limited board space in older units, so adding a circuit means rethinking the board rather than adding to it
Not always. If the board has ceramic fuses, no safety switches, or no spare positions left, it is holding the house back and usually needs replacing. If it is sound and simply full, making room is $150 to $400. Send a photo and we will tell you which one you have before you commit to anything.
We do not publish one figure because boards are not one job — a tidy modern board needing two extra circuits and a 1960s fuse panel with no earth are different pieces of work. What we do instead is price it from a photo, in writing, before we come out. Making room in an otherwise sound board is $150 to $400.
Semis, terraces and walk-up blocks, which means half the boards here are shared. Before anything starts, the line between your lot and common property has to be established — otherwise the wrong party gets the bill for the work. Post-war homes and unit blocks either side of Condamine Street, with the traffic of Warringah Road nearby. A working mix of house and strata work, with plenty of original 1950s and 60s boards still in service in the houses.
Somebody needs to let us in, and the power is off for part of the day — usually two to four hours for a straightforward replacement. We tell you the window before the day rather than on it.
Yes. Every job gets a certificate of compliance, and the board is left labelled so the next person can see what feeds what. NSW contractor licence 270174C, and a 25 year workmanship guarantee.
That is the cheapest way to do both. The board is already open, the visit is already happening, and a charger needs its own protected circuit anyway. See EV charger installation in Manly Vale.
Rated 5.0 from 20 Google reviews. Read them all on Google.
“I have used John from Electrical 3 for many years now. He always does a fantastic job with no fuss. I can always rely on his prompt service and reasonable rates.”
Also LED downlights in Manly Vale and EV charger installation. Or general electrical work in Manly Vale.
