Send a photo of your board and get a fixed price for Brookvale before anyone comes out. Electrical3 is based in Cromer, minutes from Brookvale, and this is work we do across the Northern Beaches every week.
Every figure below is what we install for, including GST.
| What | Price inc GST | What it covers |
|---|---|---|
| Fixed price from a photo | Free | Send a photo of the board and the meter. You get the price before anyone comes out. |
| Making room in a full board | $150 to $400 | Where the board is otherwise sound and just has no spare position. |
| Safety switches added | Quoted with the board | RCBOs on the circuits that need them, priced as part of the job. |
| Surge protection, same visit | $397 single phase $638 three phase | Cheapest while the board is already open, rather than a separate call-out. |
| Full board replacement | Quoted before we start | Ceramic fuses, no safety switches, or a board at the end of its life. |
Shops, units and light industrial in the same few streets. Boards here are three-phase as often as not, and the work has to happen without shutting a business down for the day — which is a scheduling problem as much as an electrical one.
Not mainly residential — this is the light industrial and retail heart of the Northern Beaches, with Warringah Mall and the trade estates. Work here is three-phase supply, distribution boards, warehouse and shop lighting, and jobs that have to be done around a business staying open rather than shutting it down.
Three-phase supply and distribution boards in commercial and light industrial units
Apartment blocks where the fault sits between the meter room and the unit
Work that has to be staged around trading hours rather than done in one hit
Not always. If the board has ceramic fuses, no safety switches, or no spare positions left, it is holding the house back and usually needs replacing. If it is sound and simply full, making room is $150 to $400. Send a photo and we will tell you which one you have before you commit to anything.
We do not publish one figure because boards are not one job — a tidy modern board needing two extra circuits and a 1960s fuse panel with no earth are different pieces of work. What we do instead is price it from a photo, in writing, before we come out. Making room in an otherwise sound board is $150 to $400.
Shops, units and light industrial in the same few streets. Boards here are three-phase as often as not, and the work has to happen without shutting a business down for the day — which is a scheduling problem as much as an electrical one. Not mainly residential — this is the light industrial and retail heart of the Northern Beaches, with Warringah Mall and the trade estates. Work here is three-phase supply, distribution boards, warehouse and shop lighting, and jobs that have to be done around a business staying open rather than shutting it down.
Somebody needs to let us in, and the power is off for part of the day — usually two to four hours for a straightforward replacement. We tell you the window before the day rather than on it.
Yes. Every job gets a certificate of compliance, and the board is left labelled so the next person can see what feeds what. NSW contractor licence 270174C, and a 25 year workmanship guarantee.
That is the cheapest way to do both. The board is already open, the visit is already happening, and a charger needs its own protected circuit anyway. See EV charger installation in Brookvale.
Rated 5.0 from 20 Google reviews. Read them all on Google.
“I have used John from Electrical 3 for many years now. He always does a fantastic job with no fuss. I can always rely on his prompt service and reasonable rates.”
Also LED downlights in Brookvale and EV charger installation. Or general electrical work in Brookvale.
